Видео

I followed the video but seem to have trouble getting an ip address assigned by the dhcp. I have used a different range for the ip scope (10.0.0.10 - 10..0.0.100) and when i logged into the workstation pc Im getting assigned a private ip address (192.168.64.110)despite dhcp being enabled. Any suggestions?

This was perfect! Thanks so much

have a problem i can not solve, I have a small server it was running on Open media vault 5,5 no problem for 2 years, then it updated and everything in the "network" Dir disapared. so i tried OMV V6.0 same problem. so i went for a full upgrade, i installed windows 11 Pro and got Windows server 2022. i have tried everything i can think of, spent weeks on the internet and RUclips, ontime i got one drive to appear in the desktop Explorer after a reboot it was gone. i have set the server as a file server and set the drive share, have set open share all on both units, and still i can not get the server drives to list in the desktop explorer. i have now run out of ideas, can you help please. Steve

have a problem i can not solve, I have a small server it was running on Open media vault 5,5 no problem for 2 years, then it updated and everything in the "network" Dir disapared. so i tried OMV V6.0 same problem. so i went for a full upgrade, i installed windows 11 Pro and got Windows server 2022. i have tried everything i can think of, spent weeks on the internet and RUclips, ontime i got one drive to appear in the desktop Explorer after a reboot it was gone. i have set the server as a file server and set the drive share, have set open share all on both units, and still i can not get the server drives to list in the desktop explorer. i have now run out of ideas, can you help please. Steve

Hi, it's very usefull one problem solved, And please help me if I want share folder which is common for everyone how can avail that folder in user H drive

This was more informative and helpful than the last hour of articles I was reading to try and understand this concept.

thank u my friend.

Good boss please I want to learn fully server security how can I start please I need your guidance

Thanks for the video! This was really helpful. Question about the DNS settings. Your Server1 was had it's DNS server pointing to itself. Before promoting to DC, Server2 was set to Server1's address. After Server 2 was made DC with DNS role, should it then alos point to itself for DNS?

Hi I've been your great RUclips fan. Please how do I join a laptop on another Network/over the internet to my homelab SERVER 2022 DC without using VPN? Thanks

Thank you for the guidance, got caught up on DNS settings not finding host server. For anyone else that can ping the server but nslookup cant find it: client DNS address = Server IP address. boom

Least Privilege always wins.

Jon will have "Read" Permissions as the most restrictive permission "WINS"

Thank you ❤

Two questions. For this series of tutorials; 1- Do we want to use DHCP or is this a closed network? I noticed you went for a 192.168.1.0/24 configuration. 2-I also notice that you set aside a partition when allocating the disk space at the very beginning when creating the VMServer. I forgot to do that. Can that be undone or should I create a new virtual machine? by the way. thank you for such informative video.

nice series up until this point. May i ask you what network settings you are using for your VM's? I tried everything and i can ping my server from the client vm but not find the DNS server. The DNS event loggs a warning ID4013: "The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed..." Any idea how to resolve this issue?

sir, Good afternoon, I am Jinesh From india, i try to learning AD your videos all support me. and learn more but i am not understand what i do?

Hello Jon, your videos on Windows Server 2022 have been a great help to me. I was able to download Windows Server 2022 and make for initial setup, Installation and configuration. Setting up Active Directory & Domain Services was no problem with your video. When it came to Installing & Configuring DHCP, there were some difficulties. None of my other computers were showing up on the Address Leases. What I noticed is that on the Server, in the Network Sharing, I would turn on the “Discover” tabs and hit “save changes”. I would exit out, come back in to find the “Discover” tabs turned off. I came to find out that in Search Bar, I should type in services.msc to open the Services Window. Then I would try and make sure that DNS Client, Function Discovery Resource Publication, SSDP Discovery and UPnP Device Host were all running. I found SSDP Discovery and UPnP Device Host to be Stopped. I went to each, made them to be as Automatic and hit Start to make them as Running. Then I would turn the Network Discoveries “on” and they would stay on. At that point my other computers would show up on the Address Leases after changing the IPV4 to “Obtain Address”. But now I want to make the computers to Join the Domain. I would hope that there might be a Tool to take the computer from DHCP to the Domain which I do not see. I have tried to assign IPV4 Static addresses as by the DHCP Assigned IPV4. I go to System>About> Domain. I click on the icon to change Domain. On the Windows Server 2022, Local Server, Domain is shown as topnotch.com. I go to System Properties window. Click to Change Domain or Workgroup. Click for Domain. If I type in topnotch.com and hit OK, I immediately get an error notice that “An Active Directory Domain Controller (AC DC) for the domain “topnotch.com” could not be contacted. I try again entering just topnotch and hit OK. A Window for Computer Name/Domain opens up. I type in the User Name just las shown at login. I type in the password used at login and hit OK. A few minutes goes by and I get the following error message: The following error occurred attempting to join the domain “topnotch”: The specified domain either does not exist or could not be contacted. At times I wonder about making for a Subdomain name. I also think about how I changed SSDP and UPnP and the DHCP worked.

Can you tell me why I'm getting this error "The following error occurred attempting to join the domain " ": The specified domain either does not exist or could nat be contacted

In regards to static IP assignments - what if I have laptops that need to remain mobile? IE what if I want them to be able to authenticate into the domain from anywhere, not necessarily from the same office?

Thank you for this helpful video! Very simplistic!

very helpful for my final exam thankyou SIR

I saw your list of videos and how to progressively go through them. Have made some progress. But now I have come to Installing & configuring DHCP - Windows Server 2019. My problem is when you go to list the IP No.s and Exclusions. I have 6 computers where the I.P.s go from 10.0.0.3X to 10.0.0.8X to 10.0.0.13X to 10.0.0.21X 10.0.0.24X to 192.168.2.X. How would I list all these I.P.s with or without Exclusions or is there another way to list the I.P.s? I have tried changing the I.P.s where they are near range to each other but a short time later, they revert back.

Thank you for the videos! Awesome content!!

hello thank you for your best tutorial first :) i have question here i joined a pc to my domain but the user still can install any app without administrator permission and password

Helpfull

I am a retired Land Surveyor who has worked for larger Engineering firms where we would share Engineering Data from the Field Surveyors to the Office Surveyors to the Civil Engineers and Architects and back and forth through the companies File Servers, to complete a Land Development Project. Now I am trying to make for my own Home Server. I found an older Desktop Computer with 64GB RAM and 7.28TB Storage. I have downloaded and done a partial installation on Windows Server 2019 Standard in my computer. But now I am wondering what is the progression or sequence as to which of your video's on Windows Server 2019 might come first, second, third............... Your video's have been most understandable to me regarding Windows Server 2019. You might consider making a video on the sequence or progression of all the Windows Server 2019 video's which is the foundation and how you build your way up.

Amazing video, can you make a video tutorial about how to migrate windows server 2022 from hyper-v to azure , I have a domain controller in hyperv that I want to migrate to azure , thanks you for your videos , I learned a lot from it

Whats the best way to document it?

Should i have two windows server? Or just one server with two user acounts to add a secondary domain

great tutorial , thank you !

Well done

Why domain controllers have same sid?

Your video is very excellent and meaning full.

Thank you for the videos!

Hi sir it would be more valuable if you continue on not just adding domain…but also migrations, FSMO role, promoting new DC etc

Great video, very clear and informative.

Thank you it's a very helpful video, for the Answer to your Question Jon will access the Tickets Folder Shared Permission which is the Most Restrictive permission.

Very insightful video Jon - reminded me some of the core concepts with sharing files and folders across a corp network - thank you for sharing.

I hope you enjoy the video! Don't forget to answer the knowledge check question at the end of the video!

thank you for the instructions. it has been very helpful

Great videos... I am curious if you could do a video on how to set up applications that can be remotely accessed from the server. Like 365, Quicken, or other third-party apps... Or add a link to an existing video. I am not an IT person and just started trying to set up my small business server.

Thanks

A big thanks👍 please what is the reason for setting the IP address to static. 1:51

I have few folders that cannot open because of S-1-5-21 user. because of my computer formatted, I cannot use these files. how to regain access of this folders?

Good day Sir. Thank you for this informative video. I found it very helpful. Can you do another one the Server Manager. How it works and how to properly put it to use. Thank you

Very clear explanation thank you

Similar process for a Windows 11 desktop to windows server 2019?

The scenario was vey good showing how important AD is for beginner for me. Unfortunately, got no substitle for me to read since im not non native speaker of English